Exported Functions

• ?MOTION_default_const_vmove@@YGXGG@Z (Ordinal: 1, Address: 0x8f70)
• d2610_board_rest (Ordinal: 2, Address: 0x9dc0)
• ?d2610_config_CMP_PIN_re@@YGXGGGG@Z (Ordinal: 3, Address: 0x6b90)
• d2610_config_axis_io_filter (Ordinal: 4, Address: 0xa670)
• d2610_ex_s_pmove_unitmm (Ordinal: 5, Address: 0x92f0)
• d2610_ex_t_pmove_unitmm (Ordinal: 6, Address: 0x9270)
• ?d2610_get_encoder_fpga@@YGJG@Z (Ordinal: 7, Address: 0xa180)
• ?d2610_get_latch_value_fpga@@YGJG@Z (Ordinal: 8, Address: 0xa280)
• d2610_read_company_information (Ordinal: 9, Address: 0xa750)
• d2610_reset_target_position_unitmm (Ordinal: 10, Address: 0x9730)
• d2610_s_pmove_unitmm (Ordinal: 11, Address: 0x92b0)
• ?d2610_set_encoder_fpga@@YGXGJ@Z (Ordinal: 12, Address: 0xa1b0)
• d2610_set_ez_logic (Ordinal: 13, Address: 0x6a50)
• d2610_set_latch_trigger_source (Ordinal: 14, Address: 0x76f0)
• d2610_set_profile_unitmm (Ordinal: 15, Address: 0x95f0)
• d2610_set_s_profile_unitmm (Ordinal: 16, Address: 0x9650)
• d2610_set_st_profile_unitmm (Ordinal: 17, Address: 0x96c0)
• d2610_set_vector_profile_unitmm (Ordinal: 18, Address: 0x9590)
• ?d2610_t_line2_ex@@YGXGJGJG@Z (Ordinal: 19, Address: 0x8120)
• d2610_t_line2_unitmm (Ordinal: 20, Address: 0x9330)
• ?d2610_t_line3_ex@@YGXPAGJJJG@Z (Ordinal: 21, Address: 0x8550)
• d2610_t_line3_unitmm (Ordinal: 22, Address: 0x93b0)
• ?d2610_t_line4_ex@@YGXPAGPAJG@Z (Ordinal: 23, Address: 0x88d0)
• d2610_t_line4_unitmm (Ordinal: 24, Address: 0x9470)
• ?d2610_t_line6_ex@@YGXPAGPAJG@Z (Ordinal: 25, Address: 0x8ca0)
• d2610_t_pmove_unitmm (Ordinal: 26, Address: 0x9230)
• d2610_variety_speed_range_unitmm (Ordinal: 27, Address: 0x9500)
• d2610_arc_move (Ordinal: 28, Address: 0xa860)
• d2610_arc_move_unitmm (Ordinal: 29, Address: 0xaa10)
• d2610_axis_io_status (Ordinal: 30, Address: 0x7550)
• d2610_axis_status (Ordinal: 31, Address: 0x7580)
• d2610_board_close (Ordinal: 32, Address: 0x9f00)
• d2610_board_init (Ordinal: 33, Address: 0xb020)
• d2610_board_reset (Ordinal: 34, Address: 0x9ef0)
• d2610_change_speed (Ordinal: 35, Address: 0x78e0)
• d2610_check_done (Ordinal: 36, Address: 0x7660)
• d2610_config_ALM_PIN (Ordinal: 37, Address: 0x67f0)
• d2610_config_CMP_PIN (Ordinal: 38, Address: 0x6b00)
• d2610_config_CSTA_PIN (Ordinal: 39, Address: 0x9aa0)
• d2610_config_EL_MODE (Ordinal: 40, Address: 0x6920)
• d2610_config_EMG_PIN (Ordinal: 41, Address: 0x69a0)
• d2610_config_ERC_PIN (Ordinal: 42, Address: 0x6730)
• d2610_config_EZ_PIN (Ordinal: 43, Address: 0xa490)
• d2610_config_INP_PIN (Ordinal: 44, Address: 0x66b0)
• d2610_config_LTC_PIN (Ordinal: 45, Address: 0x6850)
• d2610_config_LTC_filter (Ordinal: 46, Address: 0xa5a0)
• d2610_config_PCS_PIN (Ordinal: 47, Address: 0x6630)
• d2610_config_SD_PIN (Ordinal: 48, Address: 0x65a0)
• d2610_config_comparator (Ordinal: 49, Address: 0x7360)
• d2610_config_encoder_filter (Ordinal: 50, Address: 0xa5e0)
• d2610_config_handle_freq (Ordinal: 51, Address: 0x9ba0)
• d2610_config_handle_multi (Ordinal: 52, Address: 0x9b70)
• d2610_config_home_mode (Ordinal: 53, Address: 0x8ea0)
• d2610_config_latch_mode (Ordinal: 54, Address: 0xa560)
• d2610_config_softlimit (Ordinal: 55, Address: 0x7270)
• d2610_counter_config (Ordinal: 56, Address: 0xa2c0)
• d2610_decel_stop (Ordinal: 57, Address: 0x71d0)
• d2610_emg_stop (Ordinal: 58, Address: 0x7210)
• d2610_enable_handwheel (Ordinal: 59, Address: 0x9b10)
• d2610_enable_softlimit (Ordinal: 60, Address: 0x72c0)
• d2610_ex_s_pmove (Ordinal: 61, Address: 0x7e80)
• d2610_ex_t_pmove (Ordinal: 62, Address: 0x7cd0)
• d2610_get_counter_flag (Ordinal: 63, Address: 0xa370)
• d2610_get_encoder (Ordinal: 64, Address: 0xa0b0)
• d2610_get_encoder_unitmm (Ordinal: 65, Address: 0xa980)
• d2610_get_equiv (Ordinal: 66, Address: 0x9100)
• d2610_get_error_intfactor (Ordinal: 67, Address: 0x76c0)
• d2610_get_latch_flag (Ordinal: 68, Address: 0xa350)
• d2610_get_latch_value (Ordinal: 69, Address: 0xa220)
• d2610_get_position (Ordinal: 70, Address: 0x7490)
• d2610_get_position_unitmm (Ordinal: 71, Address: 0x91a0)
• d2610_get_rcun_latch_value (Ordinal: 72, Address: 0x7750)
• d2610_get_rsts (Ordinal: 73, Address: 0x75a0)
• d2610_get_version (Ordinal: 74, Address: 0xa810)
• d2610_handwheel_move (Ordinal: 75, Address: 0x8da0)
• d2610_home_move (Ordinal: 76, Address: 0xa8d0)
• d2610_imd_stop (Ordinal: 77, Address: 0x71f0)
• d2610_prebuff_status (Ordinal: 78, Address: 0x7690)
• d2610_pulse_loop (Ordinal: 79, Address: 0xaa30)
• d2610_read_CMP_PIN (Ordinal: 80, Address: 0x6c00)
• d2610_read_RDY_PIN (Ordinal: 81, Address: 0x71a0)
• d2610_read_SEVON_PIN (Ordinal: 82, Address: 0x7170)
• d2610_read_current_speed (Ordinal: 83, Address: 0x7840)
• d2610_read_current_speed_unitmm (Ordinal: 84, Address: 0x9540)
• d2610_read_error_int_factor (Ordinal: 85, Address: 0xa080)
• d2610_read_event_int_factor (Ordinal: 86, Address: 0xa050)
• d2610_read_inbit (Ordinal: 87, Address: 0x6c70)
• d2610_read_inport (Ordinal: 88, Address: 0x6d30)
• d2610_read_outbit (Ordinal: 89, Address: 0x6e90)
• d2610_read_outport (Ordinal: 90, Address: 0x6f60)
• d2610_read_password (Ordinal: 91, Address: 0xa7c0)
• d2610_read_pcl_register (Ordinal: 92, Address: 0x9c00)
• d2610_rel_arc_move (Ordinal: 93, Address: 0x8d90)
• d2610_rel_arc_move_unitmm (Ordinal: 94, Address: 0x97b0)
• d2610_reset_clear_flag (Ordinal: 95, Address: 0xa3d0)
• d2610_reset_counter_flag (Ordinal: 96, Address: 0xa390)
• d2610_reset_latch_flag (Ordinal: 97, Address: 0xa3b0)
• d2610_reset_target_position2 (Ordinal: 98, Address: 0x7bb0)
• d2610_reset_target_position (Ordinal: 99, Address: 0x7b60)
• d2610_s_pmove (Ordinal: 100, Address: 0x7da0)
• d2610_s_vmove (Ordinal: 101, Address: 0x8ff0)
• d2610_set_HOME_pin_logic (Ordinal: 102, Address: 0x69f0)
• d2610_set_board_isr (Ordinal: 103, Address: 0x9f30)
• d2610_set_comparator_data (Ordinal: 104, Address: 0x7440)
• d2610_set_encoder (Ordinal: 105, Address: 0xa110)
• d2610_set_encoder_unitmm (Ordinal: 106, Address: 0xa9d0)
• d2610_set_equiv (Ordinal: 107, Address: 0x9130)
• d2610_set_handwheel_inmode (Ordinal: 108, Address: 0x6540)
• d2610_set_int_factor (Ordinal: 109, Address: 0x9f40)
• d2610_set_position (Ordinal: 110, Address: 0x74f0)
• d2610_set_position_unitmm (Ordinal: 111, Address: 0x91f0)
• d2610_set_profile (Ordinal: 112, Address: 0x79d0)
• d2610_set_pulse_outmode (Ordinal: 113, Address: 0x64b0)
• d2610_set_s_profile (Ordinal: 114, Address: 0x7a60)
• d2610_set_softlimit_data (Ordinal: 115, Address: 0x7310)
• d2610_set_speaker_logic (Ordinal: 116, Address: 0xa450)
• d2610_set_st_profile (Ordinal: 117, Address: 0x7ae0)
• d2610_set_sync_option (Ordinal: 118, Address: 0x9950)
• d2610_set_sync_stop_mode (Ordinal: 119, Address: 0x9a10)
• d2610_set_t_move_all (Ordinal: 120, Address: 0x97c0)
• d2610_set_vector_profile (Ordinal: 121, Address: 0x79a0)
• d2610_simultaneous_stop (Ordinal: 122, Address: 0x7250)
• d2610_start_move_all (Ordinal: 123, Address: 0x9900)
• d2610_t_line2 (Ordinal: 124, Address: 0x7f60)
• d2610_t_line3 (Ordinal: 125, Address: 0x8360)
• d2610_t_line4 (Ordinal: 126, Address: 0x8710)
• d2610_t_line6 (Ordinal: 127, Address: 0x8b00)
• d2610_t_pmove (Ordinal: 128, Address: 0x7c00)
• d2610_t_vmove (Ordinal: 129, Address: 0x9080)
• d2610_triger_chunnel (Ordinal: 130, Address: 0xa410)
• d2610_variety_speed_range (Ordinal: 131, Address: 0x77a0)
• d2610_write_CMP_PIN (Ordinal: 132, Address: 0x6c30)
• d2610_write_ERC_PIN (Ordinal: 133, Address: 0x7120)
• d2610_write_SEVON_PIN (Ordinal: 134, Address: 0x70e0)
• d2610_write_outbit (Ordinal: 135, Address: 0x6dc0)
• d2610_write_outport (Ordinal: 136, Address: 0x7000)
• d2610_write_pcl_register (Ordinal: 137, Address: 0x9be0)
• read_dword_pld_register (Ordinal: 138, Address: 0x6280)
• smc_test_move (Ordinal: 139, Address: 0x9cc0)
• write_dword_pld_register (Ordinal: 140, Address: 0x6240)

Imported DLLs & Functions